Plane Insane RC

Home
Airplanes
Assassin / Titan
Batteries
Cameras
Cars
Chargers
Esky Replacement Parts
Helicopters
LEDs
Motors and ESCs
Props, Blades, Acces.
Radios and Simulators
Servos
Aerial Photography
Contact Us
About Us
SS Build Pages
Log In

Motors

Turnigy C3530-1700kv Brushless Outrunner

This is a great motor for the Titan and other planes that need a little extra pick me up.

Input Voltage: 7.4V-14.8V (2-4S Li-poly)
KV: 1700 rpm/V
Dims: 35mm X 30mm / 1.38in X 1.18in
Shaft diameter: 4mm / 0.16in
Weight: 77g / 2.72oz
Number of poles/magnets: 14
Recommended model weight: 600-1300g / 21-45oz
Stator Dims: 28-08
Power: 340W

DT750 Brushless Outrunner Motor

The DT750 is an inexpensive powerful motor that works great on a slow stick or a Tri Copter. This is a 750kv motor and works great with an 11x4.7 prop.

Required Voltage: 11.1v
Suggested Prop: 10x4.7 or 11x4.7
Max current draw: 18A (with 11x4.7 prop)
Max thrust: 1000g+
No Load Current: 1.4A
Shaft: 4M
Weight: 78g
Diameter: 41mm
Overall length: 77mm
KV: 750rpm/v

HXT 2835 2700kv Brushless Inrunner

Get the flash player here: http://www.adobe.com/flashplayer

Turnigy has made some really good motors. This one just happens to be my favorite on a flying wing from 36 to 50 inches. Not blistering fast but very good vertical performance. Make sure your using a 30amp ESC and you will also need a prop adapter. The motor does come with 3 female bullet connectors and the male connectors are already soldered to the motor leads.

Motor Size: 2835 (380S)
Speed: 2700kv
ESC Required: 25A
Voltage Range: 6~12v
No Load Curr: 1.2A
Max Load: 35A

Diameter: 28.2mm
Length: 37mm
Front Mounting Hole Distance: 19mm
Front Mount Thread Size: M3
Shaft Diameter: 3.2mm
Shaft Length: 12mm
Weight: 102grams
Recomended Prop: 5x5, 5x4.5, 6x4

HXT 2030 3500kv Brushless Inrunner

Get the flash player here: http://www.adobe.com/flashplayer

The HXT 2030 is a small motor for smaller wings and other air frames. Like the 2835 it too comes with male bullet connectors already soldered to the motor ends and 3 female ready to be soldered to your favorite 18amp ESC.

Motor Size: 2030 (130Short)
Speed: 3500kv
ESC Required: 15A
Voltage Range: 6~12v
No Load Curr: .6A
Max Load: 14A

Diameter: 20.2mm
Front Mounting Hole Distance: 16mm
Front Mount Thread Size: M2.5
Shaft Diameter: 2.3mm
Shaft Length: 15mm
Weight: 45g
Suggested prop size: 4.7x4.7

Use this Prop adapter.

Tower Pro 2409-18T Combo with Prop

The Tower Pro 2409-18T combo is a great combo for a Slow Stick. This combo comes with the 2409-18T motor, prop, mounting hardware, stick mount, firewall mount, and 25amp ESC.

KV 1000
Props:
9x3.8
8x6
7x4

Tower Pro 2409-18T Motor and Mount

KV 1000
Props:
9x3.8
8x6
7x4

Parts

Tower Pro 2408-21T Combo with Prop

The TowerPro Brushless combo comes with the powerful 2408-21T brushless motor, 18amp programable ESC, Prop, Motor Mount and hardware package.
KZ 1400
Props:
9x3.8
8x6
7x4

Tower Pro 2408-21T Motor and Mount

If you want to keep it cheap but want a powerful brushless motor then you can't go wrong with the 2408-21T brushless motor. It works great on Slow Sticks, flying wings and warbirds.
KZ 1400
Props:
9x3.8
8x6
7x4

KD A22-20L

Need even more power than the KA20-20L? This is the KD A22-20L motor you need.

Dimensions: 28x39mm
Rating: 1000kv
Battery Config: 3 Lipo Cells
Shaft: 3.0mm
Weight: 85gr
Length: 12mm
Operating Current: 6-21A
Max Current: 25A
Prop: 10x4.7

Motor Accessory Pack

CF28-12 Brushless Motor

The CF28-12 has proven to be an excellent motor for the money. This is a very good motor for flying wings and also for GWS park flyers.

**Note this motor does not come with a prop adapter. It requires a 3mm prop adapter**

Weight: 39g
Shaft: 3mm
Motor Length: 46mm
Diameter: 28mm
Suggested prop: 7x4
Voltage: 11.1v
Kv: 1500
Max Current: 10.5amp

3mm prop adapter

This motor mount works with the DT750 and the Tower Pro motors. It fits on the Slow Stick Fuse.

GWS Plastic Motor Mount for Brushless Outrunner Motors.