Plane Insane RC - Assassin / Titan Core Kits

Home
Airplanes
Assassin / Titan
Batteries
Cameras
Cars
Chargers
Esky Replacement Parts
Helicopters
LEDs
Motors and ESCs
Props, Blades, Acces.
Radios and Simulators
Servos
Aerial Photography
Contact Us
About Us
SS Build Pages
Log In

Assassin / Titan Core Kits

Titan Core Kit

Here it is the Titan Core kit. Get the stuff you need to finish this kit off right. You want power? Here it is! The Titan has unlimited vertical with this motor, ESC and Prop combo.

1 - Mystery 30amp ESC (The Mystery 30amp ESC is not pictured but it will take the place of the SS 30amp.)
1 - Turnigy C3530-1700kv Brushless Outrunner
1 - Set of 3 Bullet Connectors (motor to ESC)
1 - 7x5 Prop
1 - Prop Nut
3 - Heat Shrink Tubes
1 - Mounting hardware
1 - Fire Wall Mount
1 - Prop Saver *Not Shown but included*

Assassin Core Kit

This is the Core Brown Bag kit. It comes with the powerful CF2812 Brushless Outrunner motor, a 20amp Super Simple ESC, 3 pair of bullet connectors, 6 pieces of shrink tube, 3mm prop saver adapter, 3 prop rings, a 7x5 prop, 2 small bolts, washers and nuts for mounting your motor to your motor mount.

1 - Mystery 30amp ESC (The Mystery 30amp ESC is not pictured but it will take the place of the SS 30amp.)
6 - Heat Shrink Tubes
3 - Prop Rings
1 - 3mm Prop Saver
1 - Set of 3 Bullet Connectors (motor to ESC)
1 - CF28-12 Brushless Motor
1 - Set of hardware to attach your motor
1 - 7x5 Prop
*This kit now has the 20amp non card programmable ESC in place of the 30amp.*

Assassin Core Kit TowerPro

Lee said it himself, the TowerPro BP21 (2408-21)has more power than the CF2812 motor and it's easier to keep in stock (I take that back, just as hard to keep in stock)so here it is in a combo with the stuff you need.

1 - TowerPro 18amp ESC
6 - Heat Shrink Tubes
3 - Prop Rings
1 - 3mm Prop Saver
1 - Set of 3 Bullet Connectors (motor to ESC)
1 - TowerPro BP21 2408-21 Brushless Motor
1 - Set of hardware to attach your motor
1 - 7x5 Prop

Batteries For the Assassin
Choose a battery below. 1200mAh to 1350mAh work great in the Assassin. You might want to get a couple to start with.

Rhino 11.1 volt 1350mah 25C Lipoly Battery

A great battery for the money. The Rhino 1350 has a 25C rating which means it can be used for setups that pull a lot of power.

Turnigy 11.1 v 1300mAh 25C Lipoly Battery

You really can't beat the price on a battery that rocks so hard! These packs come with 3.5mm Gold Connectors. If your not using the 3.5mm connectors, you can easily change them out for your favorites.

***This Battery now comes with an XT60 connector NOT the connector shown in the picture***

Servos for the Assassin
Metal gear servos are a must if your going to be doing any type of combat or just learning to fly. TowerPro servos are great for someone with a wife that's aways telling him he's on a budget.



Set of 2 Tower Pro MG90 (Metal Gear) If your on a tight budget but need a metal gear servo then here you go. Specs: Dimensions: 23 x 12.2 x 29mm Weight: 14g Operating Speed: 0.11sec/60 degrees (4.8V no load); 0.09sec/60 degrees (6.0V no load) Stall Torque : 2.4kg/cm 33.3oz/in(4.8V); 2.8 kg/cm 38.8oz/in (6.0V) Temperature Range: 0 to +55 Degree C Dead Band Width: 5usec Operating Voltage:4.8-6 Volts Servo Tower Pro Metal Gear MG90 (2 Servos) $29.90	Set of 2 Turnigy TGY - MG90S (Metal Gear) If your on a really tight budget then this is the metal gear servo for you. Specs: Dimensions: 22.812.228.5mm Weight: 13.4g Operating Speed : 0.10sec/60degree(4.8v)0.08sec/60degree(6.0v) Stall Torque : 1.8kg/cm(4.8v) 2.2kg/cm(6.0v) Temperature Range: 0 to +55 Degree C Dead Band Width: 5usec Operating Voltage:4.8-6 Volts Gear type: metal gear (not recommended for 3d helicopters) Servo Turnigy Metal Gear TGY-90S (2 Servos) $20.00

Chargers
With Lipoy batteries a balancing charger is a must. Choose from a wall input (110/240v) charger or a 12volt input charger.



Turnigy 2/3 Cell Balancing Charger with Wall Plug Get the flash player here: http://www.adobe.com/flashplayer If your sick of powering you charger off your kids 12volt power wheels battery then this is the charger for you. No more annoying alligator clips and 12v batteries that will almost always die in the middle of the charge. This one is powered off the good old wall current and for under $20 bucks, you can't beat it! It charges 2 and 3 cell batteries. Charges at 650mA per cell. Charger Turnigy 2/3 cell Wall Charger $17.95	Turngy 2/3 Cell Balancing Charger Get the flash player here: http://www.adobe.com/flashplayer This balancing charger will charge 7.4 volt and 11.1 volt Li-Poly battery packs. It comes with alligator clips and needs power from a 12 volt battery. (1)Input Voltage 12 volts (2)Input Current 1500 mAh (3)Single battery full voltage 4.2V?0.05V (4)Minimum chargeable battery voltage: 1.25V (5)The restoration time of defective battery: 3 MIN (If restoration still can not be finished when overtime, indicate that the battery has been damaged) (6)Practicable charge current: 1000 mAh Charger - 2/3-cell balancing charger with 12-volt battery clips $14.95

Battery Connectors
With all the different batteries with different battery connectors out there, it's hard to choose just one but it sure makes it nice.

4mm Gold connectors These come standard on the 2200mAh Turnigy packs. You can run a lot of power through these puppies. Connectors HXT 4mm Gold $1.00	Deans Male and Female connector Connectors Deans Male and Female $2.50
EC3 Connectors, Set of 2 Connectors EC3 $2.00	XT 60 Connectors These come standard on several of our packs. They are easier to solder than the Deans. Connectors XT60 $1.50

What is the Assassin?

The Assassin is a full EPP combat wing. They sell for $49.95. For more information or to order an Assassin, go to Crash Test Hobby

Other Supplies Needed

CA Accelerator

Insta-Set is a CA glue Accelerator. It comes in a 2oz bottle with a spray attachement. This is a foam safe product.

CA Foam Safe Glue

This Glue is Foam Safe and will instantly bond skin or even your tongue to your teeth. Ask me how I know.

Extreme Tape

You know you need some of this stuff. I have a tricopter that I used this stuff on. I used to use carbon fiber spars to keep the arms from flexing but since I started using this stuff, no more spars needed!

Assassin #1 RC Combat Wing from Lee on Vimeo.