Plane Insane RC

Home
Airplanes
Batteries
Chargers
Combat
LEDs
Motors and ESCs
Props, Blades, Acces.
Quad Copters
Radios, Recs, Sims
Servos
Tools
Aerial Photography
Contact Us
About Us
SS Build Pages
Log In


Quad Racer Parts

ZMR250 Carbon Fiber Quad Frame
ZMR250 Carbon Fiber Quad Frame

Looking for a cheap Basher/Racer frame?  This Carbon Fiber 250 frame will can take a hit!
  • Carbon Fiber
  • 250mm
  • 3mm Arm thickness
  • Aluminum alloy spacer
  • 170g
 
Quad Frame 250 Carbon Fiber
$24.99

Diatone ZMR250 V2.1 PDB
Diatone ZMR250 V2.1 PDB

Want to make your build super easy?  Get on of these bad boys.  They make the soldering part of the build simple by providing pads to solder your wires to.  It also has a built in BEC which provides 5v for your control board and 12v for your camera.  This is especially useful if your running 4s batteries because it steps the voltage down to 5v and 12v.  Be sure you use the provided insulator washers between the board and the arms.  I don't think I'll ever build a ZMR again without one of these.

Quad Diatone ZMR 250 PDB
$8.99
 

Afro 12amp ESC
Afro 12amp ESC

Afro Opto 12A version 3. Can be used with 2-4s lipo. 5v BEC, perfect for powering the Naze32 control board. 

Spec:
  • Specs:
  • Current Draw: 12A Continuous
  • Voltage Range: 2-4s Lipoly
  • BEC: 0.5A Linear 5.0v
  • Input Freq: 1KHz
  • Firmware: afro_nfet.hex
  • Discharge wire/plugs: 20AWG/Male 2mm
  • Motor wire/plugs: 20AWG/Female 2mm
  • Weight: 10g (Included wire, plug, heat shrink)
  • Size: 25 x 20 x 6mm

ESC Afro 12amp
$13.00

18A Spider Lite Series ESC BLHELI-(ONESHOT)
18A Spider Lite Series ESC BLHELI-(ONESHOT)

Specs:
Constant Current: 18A
Max Burst Current: 30A
Input Voltage: 2~4S LiPoly
Dimensions: 43 x 22 x 12mm
Weight: 5.3g

ESC 18amp ZTW Spider
$11.50

Emax 2204 2300kv Motors 2CW and 2CCW
Emax 2204 2300kv Motors 2CW and 2CCW

Emax 2204 2300KV Motor Specification:

  • KV: 2300
  • - Max Trust: 440g
  • - No. of cell: 2-3S
  • - Framework: 12N14P
  • - Propeller: 5" - 6"
  • - Length: 32.2mm
  • - Shaft: 3mm
  • - Diameter: 27.9mm
  • - Weight: 25g

Emax 2204 2300kv 4 pack
$44.95

Emax 2204 2300kv Motors 1CW and 1CCW
Emax 2204 2300kv Motors 1CW and 1CCW

Emax 2204 2300KV Motor Specification:

  • KV: 2300
  • - Max Trust: 440g
  • - No. of cell: 2-3S
  • - Framework: 12N14P
  • - Propeller: 5" - 6"
  • - Length: 32.2mm
  • - Shaft: 3mm
  • - Diameter: 27.9mm
  • - Weight: 25g

Emax 2204 2300kv 2 pack
$22.95

DYS BE1806-13 Brushless Motor 2300kv
DYS BE1806-13 Brushless Motor 2300kv

This is a great motor for your 250 quad needs.  2-3s.

Specs:
  • Rpm/V: 2300kv
  • Dimensions: 23 21mm
  • Shaft: 2mm
  • Voltage: 2S~3S (7.4v to 11.1v)
  • Weight: 24g
  • Watts: 89W
  • Max Current: 8A
  • ESC: 10amp to 12amp
  • Suggested Prop: 5x3(3S 11.1v) ~ 6x2 (2S 7.4v)
  • Motor Mount Holes: M2 x 12mm /16mm
***Please note the motor is black not red as pictured***

Motor DYS BE1806 2300kv BLACK
$12.70

Mobius Wide Angle C2 Lens
Mobius Wide Angle C2 Lens

Capture your video in HD.  Small and pretty light weight.  Strap this to your quad and share your videos!

Description:
1080P HD Video and Audio Recording
HFOV : 131 deg.
FOV : 1080p 30fps wide; 720p 30fps wide; WVGA 30fps wide
Resolution : 2304x1536,1920x1080, 1280x720
TV Display Ratio : 4:3 or 16:9
Movie Flip : 180 deg. rotation
Movie Sound : off plus three volume levels
Max SD Card: 32 GB SD Card (not included)
Can be used as a Dash Camera (Start / Stop Recording)
Using Time: more than 80min
Weight : 37g
Features:
Loop recording (5 min. clips with one sec. video overlap, so no lost video). Pressing the mode button while in Loop Record mode will make the current clip being recorded write protected so it will not get over written during looping. The file can be manually deleted, though.
Time lapse photos with delays between images. The targeted delay times range from 0.25 to 60 sec.
Recording LED toggle
Movie/photo time stamp toggle
Power on button delay (to prevent premature activation while handling)
Auto-record when power to the camera is applied (useful for car recorder use - no button presses needed.)
Charging on/off toggle when plugged into a USB data port (useful for some external USB devices)
TV out (PAL or NTSC), which will include a playback mode.
GUI program support for setting the parameters available.

Package Included:
1 x Mobius Wide-Angle Action Camera
1 x USB Cable
1 x Mini Screwdriver
1 x Mounting Sleeve

Mobius C2 Lens 985644
$75.99

DAL 4040 Props Green Quad Blade 4 Pack
DAL 4040 Props Green Quad Blade 4 Pack

2 Clockwise and 2 Counter Clockwise.

Quad Props 4040 Quad Blade Green
$2.50

DAL 4040 Props Clear Quad Blade 4 Pack
DAL 4040 Props Clear Quad Blade 4 Pack

2 Clockwise and 2 Counter Clockwise.

Quad Props 4040 Quad Blade Clear
$2.50

DAL Bullnose 5045 Props Green Tri 4 Pack
DAL Bullnose 5045 Props Green Tri 4 Pack

2 Clockwise and 2 Counter Clockwise.

Quad Props 5045 Bull Tri Green
$2.50

DAL Bullnose 5045 Props Black Tri 4 Pack
DAL Bullnose 5045 Props Black Tri 4 Pack

2 Clockwise and 2 Counter Clockwise.

Quad Props 5045 Bull Tri Black
$2.50

DAL Bullnose V2 5045 Props Black
DAL Bullnose V2 5045 Props     Black

2 Clockwise and 2 Counter Clockwise.

Quad Props DAL Bull 5045 Black
$2.50


DAL Bullnose V2 5045 Props Green
DAL Bullnose V2 5045 Props Green

2 Clockwise and 2 Counter Clockwise.

Quad Props DAL Bull 5045 Green
$2.50


DAL 5040 Prop Black
DAL 5040 Prop Black

2 Clockwise and 2 Counter Clockwise.

Quad Props DAL 5040 Black
$1.50

DAL 5040 Prop Green
DAL 5040 Prop Green

2 Clockwise and 2 Counter Clockwise.

Quad Props DAL 5040 Green
$1.50

Turnigy/Gemfan Props 5x3 1ccw 1 cw
Turnigy/Gemfan Props 5x3 1ccw 1 cw

Quad Props 5x3 Black
$2.00

Carbon Fiber 5030 1ccw 1cw
Carbon Fiber 5030 1ccw 1cw


Quad Props 5030 Carbon Fiber
$2.00

Power Distribution Board
Power Distribution Board

The power distribution board can make the solder job much easier. 50mm x 50mm. (Unfortunately the holes do not line up with the holes on the ZMR frame)

Quad Power Distribution Board
$4.99

180CF Frame
180CF Frame

Super strong and small 180 Carbon Fiber frame.  It comes as shown.

Quad 180CF Frame
$24.95

AfroFlight Naze32 Acro AbuseMark FunFly Controller
AfroFlight Naze32 Acro AbuseMark FunFly Controller

Naze32 with connectors.  The only thing complicated with this board is that you have to solder on the header pins.  Once thats done, hook it up to your computer using Google Baseflight, make any needed adjustments connect and install and your ready to go!
  • Features:
  • Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal.
  • Compatible with FrSky telemetry inverter
  • Battery voltage monitoring
  • Modern 32-bit processor running at 3.3V/72MHz.
  • Onboard MicroUSB
  • LEDs
  • MultiWii-based configuration software for easy setup
  • rev5 hardware
Quad Naze32
Out of Stock $27.00
Out of Stock

Turnigy Battery Strap
Turnigy Battery Strap

Keep your battery where it's supposed to be with this 330mm Turnigy Battery Strap.

Strap Turnigy
$3.00

Nylon Screw Set of 4
Nylon Screw Set of 4

Set of 4 Phillips head M3x8mm

Nylon Screw (set of 4)
$0.80

Nylon Nut Set of 4
Nylon Nut Set of 4

Set of 4 M3 Nylon Nuts.

Nylon Nut (set if 4)
$0.80

Nylon Spacer Set of 4
Nylon Spacer Set of 4

Set of 4 5.6mm x 12mm M3 Nylon Spacers.

Nylon Spacer (set of 4)
$0.80

Adjustable Voltage Regulator 1-17v
Adjustable Voltage Regulator 1-17v
 

These are perfect for keeping your voltage where it needs to be on your FPV equipment.  A small screw on the regulator lets you adjust the voltage from 1volt to 17volts.  Plug in any 5-23v battery and turn the screw to your desired output voltage.  Just a side note, you can not adjust the voltage up on the battery, only down.  In other words, this will NOT turn a 1s battery into a 2s battery.

Voltage Regulator 1v-17v
$2.00

ZMR Carbon Fiber Quad Arm set (2 arms)
ZMR Carbon Fiber Quad Arm set (2 arms)

Replacement arms for ZMR quads.  The screw slots are slightly larger than the stock arms and will require washers.

Quad ZMR Arms (2 arms)
$8.00

Male to Male Servo Connectors
Male to Male Servo Connectors

You will need at least 2 of these to go from your Multi-Rotor board to your receiver. Plug the rudder in as normal and only the signal pins for elevator, aileron and throttle.

Connector Male to Male 9 Inch
$1.00

Male XT60 with wire
Male XT60 with wire

XT60 Male w/ 12AWG Silicon Wire
$1.50

Female XT60 with wire
Female XT60 with wire

XT60 Female w/ 12AWG Silicon Wire
Out of Stock $1.50
Out of Stock
   

Micro Quad Copters
Micro Quad Copters

Click here for more info!

What is Quad Racing?

Not one of our videos but it sure is cool!