This has to be one of the funnest quads I have flown. It's so small you can fly in the house but yet has enough speed and range that you can even enjoy the great outdoors.
The QX80 does REQUIRE ASSEMBLY. The hardest part of the build is the soldering. Make sure you have a very fine tip on your soldering iron and you should be fine.
What do I need to get this flying?
Your going to need a 5 channel or greater Frsky or Flysky radio. Below you will select which receiver you would like shipped with the kit. The kit comes with a camera but you will need a receiver and goggles or monitor to view the video with. This is a 5.8ghz setup.
Brand Name: Eachine
Weight: 40g (Exclude battery)
Flight controller: SP RACING F3_EVO_Brush
Firmware version: Cleanflight 1.13.0
Motor: 8520 Brush Motor
Propeller Size: 55mm
Camera: 520TVL HD CMOS 1/4 inch Camera
AV Wireless Transmitter: 5.8g 25mw 32ch
Batterry: 3.7V 600mah 25C Lipo battery
Flight time: 5-6 minutes
Flight control base on F3 EVO, high current MOS output, convenient according to the personal touch.
Made of high quality carbon fiber material, a full set of take-off weight of 55 grams with battery.
Package included: (ARF Version)
1 x QX80 Carbon Fibre Frame kit
4 x 8520 Coreless Motor
1 x F3_EVO_Brush Flight controller
1 x 5.8G VTX w/Camera antenna
8 x 55mm Propeller
2 x 3.7V 600mah Battery
1 x Charging cable (use with balanced charge)
1 x Prop remover
4 props. 2 clockwise and 2 counter clockwise.